欧美高清午夜免费一级A片_69福利导航_欧美成人高清完整版电影_jizz99国产,日日摸夜夜添夜夜添中文字幕,久久国产福利,男人天堂AV女优,美女A级片,久久综合一本婷婷加勒,国产人妖另类专区,综合久久

水上物流網為船舶與海洋工程行業提供技術支持與動力,,是船舶行業最大門戶分類網站
全國: | 上海:
水上物流產品分類
雙組分船塢樹脂定量噴霧器(每分鐘40次循環)
產品圖片
 
重要參數
    所加工的質料 樹脂
    類型 雙組分
    應用領域 船塢

產品簡介

涵蓋了環氧樹脂和聚氨酯復合樹脂和涂料的廣泛應用范圍

通用配比器系統涵蓋了環氧樹脂和聚氨酯復合樹脂和涂料的廣泛應用范圍,??諝怦R達驅動一個重型搖臂連桿驅動裝置,驅動兩個雙作用往復式活塞泵,。樹脂側是固定的,,固化劑側是可調的,使用上下螺絲/夾塊來設置比例范圍,。

根據所需的流速和比率,,有一系列的流體部分和分配槍可以滿足您的需求。不銹鋼流體部分系列包括全氟橡膠軟座,,是改善粘度很低的硬化劑的計量的理想選擇,。

UPLS-1000流體部分在每分鐘40次循環的情況下,輸出范圍超過4加侖(15.14升),。例如,,與UPLS-4600硬化劑流體部分搭配,并以3:1的比例設置,,每分鐘總共可輸出5.4加侖(20.44升),。

大多數系統的標準配置是用戶友好的專業再循環槍。這使得在更換材料容器,、比例檢查,、關閉和啟動過程中,可以很容易地將空氣從系統中清除,,而不會造成材料浪費,。大容量自動1:1專業噴槍也是與該系統一起使用的理想選擇。帶有硬化440不銹鋼閥桿的不銹鋼槍頭,,標配有新的玻璃填充特氟隆閥桿密封件,。對于較低的流速,以及需要手持式噴槍的應用,,我們推薦經典的1:1專業噴槍,。

英文介紹

Covers a wide application range for epoxy and urethane laminating resins and coatings

The Universal Proportioner System covers a wide application range for epoxy and urethane laminating resin and coatings. The air motor drives a heavy duty rocker arm linkage drive which drives two double acting reciprocating piston pumps. The resin side is fixed and the hardener side is adjustable, using an upper and lower screw/clamp block to set the ratio range.

Depending on desired flow rates and ratios, a series of fluid sections and dispense guns are available to fit your needs. The stainless steel fluid section series includes perfluoroelastomer soft seats which are ideal for improved metering with very low viscosity hardeners.

The UPLS-1000 fluid section alone has an output range of over 4 gallons (15.14 liters) at 40 cycles per minute. Paired with the UPLS-4600 hardener fluid section, for example, and set at a 3:1 ratio, would total 5.4 gallons (20.44 liters) per minute.

Standard on most systems is the user-friendly Pro Recirculation Gun. This allows an easy way to purge air out of the system during material container change, ratio checks, shut-down and start-up procedures with no material waste. The High-Volume Automatic 1:1 Pro Gun is also ideal to use with this system. The stainless steel head with hardened 440 stainless steel valve rod comes standard with a new glass filled Teflon valve rod seals. For lower flow rates, and applications that require a hand held gun, we recommend the classic 1:1 Pro Gun.