產品簡介5加侖型號有自調平平臺和單動力頭,使材料保持在同一水平上,可以正確分配1:1混合比例的材料,。該系統的輸出能力有助于尋求處理小批量和中等數量的材料的用戶,。55加侖型號是需要大量精確混合材料的制造商的理想選擇。兩個切分檢查流體部分將材料輸送到一個計量泵,,然后再輸送到涂抹槍,。產量穩定,能夠經受住最苛刻的生產設施,。 5加侖 輸出能力:大約1磅/分鐘-4磅/分鐘(.45千克/分鐘-1.8千克/分鐘) 空氣消耗:25-30 CFM(0.7 - 0.9 m^3/min),。 混合比:1:1(按體積計算 可用的泵比:23:1 最大空氣輸入壓力:100 psi (7 bar) 英文介紹The 5-gallon model has self-leveling platforms and single power head keep material at the same level allowing proper dispensing of 1:1 mix ratio materials. Output capabilities of this system help users looking to process materials in both small and medium quantities. The 55-gallon models are ideal for manufacturers needing accurately mixed materials in large quantities. Two chop check fluid sections transfer material to one metering pump and then the applicator gun. The output is consistent and capable of enduring the most demanding production facilities. 5-GALLON Output Capabilities: approximately 1 lb/min – 4 lbs/min (.45kgs/min – 1.8 kgs/min) Air Consumption: 25-30 CFM (0.7 – 0.9 m^3/min) Mix Ratio: 1:1 by volume Available Pump Ratio: 23:1 Max Air Input Pressure: 100 psi (7 bar) |
易操作2臂移動船塢除塵器(多功能工業抽氣機) |
2023-12-21
|
查看詳情 >> |
國產切割臺(30X 30MM) |
2023-09-25
|
查看詳情 >> |
CNC數控復合纖維織物切割臺(船塢自動化切割) |
2023-09-26
|
查看詳情 >> |
帆布制作縫紉機COASTAL-250(適合縫制針號為130-180的中等重量帆) |
2023-10-31
|
查看詳情 >> |
船塢剪刀ARAMID(適用于輕薄材料) |
2023-10-12
|
查看詳情 >> |